NiMH
NiCd
Batt
Type
Operation
Program
Description
LiPo
LiHV
Lilon
LiFe
Charging Program
Depends on different battery type, the operation programs are different.
Program Descriptions
Balance
Charge
Charge the battery and balance the battery cell
voltage during charging
Fast
Charge
Charge
Non Bal
Charge the battery without the balance lead connected
Discharge
Storage
Discharge the battery to certain voltage level
Charge or discharge the battery to a certain voltage level
for storage
Pb/
Pb AGM
Charge
Charge the battery to the expected voltage
Discharge
Discharge the battery to a certain voltage level
D&C Cycle
Re-Peak
(NiMH only)
Peak charge the battery once, twice or three
times in cycle automatically.
Charge
Discharge
· 10
B6 Evo
B6 Evo
11 ·
CHG Power
= battery charging power, default charging power is
50W.
Temp Unit
= temperature unit, Celsius or Fahrenheit is selectable.
Safe Temp
= safe temperature.
Input Low
= input voltage is low.
CHG I
= battery charging current.
DISC I
= battery discharging current.
Cut Temp
= cutoff temperature.
D&C cycles
= discharge/charge cycles or charge/discharge cycles.
DISC V
= discharge voltage.
-dV
=
Batt Preset
= battery information setting, such as battery type, cells,
current etc.
Cut Time
= protection cutoff time.
Glossary
Charge the battery to the expected voltage
Discharge the battery to the expected voltage
Cap
= capacity or cutoff protection capacity.
delta voltage for NiMH/NiCd battery.
Discharge -> Charge
Charge the battery and speed up on balancing.