SkyPilot SkyExtender DualBand, Installation And Setup Manual

Page: 8 / 79

SkyPilot SkyExtender DualBand Installation and Setup Guide 8
Default access point configuration
The SkyExtender DualBand access point is set up to provide Wi-Fi access right out
of the box. The access point includes a preconfigured WLAN with the SSID
(service set identifier)
SkyPilotDualBand
, providing WPA-PSK (Wi-Fi protected
access – pre-shared key) protection. Users attempting to connect to the
SkyPilotDualBand
WLAN must provide a password (
publicpublic
by default).
The default configuration is provided for initial management and configuration of
the SkyExtender DualBand access point via a wireless connection. You should
always create an access point configuration before testing the device or making it
available to customers.
NOTE
A wireless network protected by WPA-PSK is vulnerable. To provide a
more secure level of protection, configure the WLAN for WPA
authentication in which each user is authenticated separately.