SkyPilot SkyExtender DualBand, Installation And Setup Manual

Page: 53 / 79

SkyPilot SkyExtender DualBand Installation and Setup Guide 53
Figure 36. Name and address fields on Access Point Configuration page
AP Name.
A name to be given to the access point. (This name is for user
convenience; it has no relation with the device address.)
Location.
A location name for the access point. (The location name is also for user
convenience; it has no effect on the device address.)
Server IP. An IP address to be used for managing the access point. It should be in
the same network segment as the management IP address for the SkyExtender.
Check
From DHCP
if the IP address is provided by a DHCP server. If
From DHCP
is
checked, the other IP address fields are unavailable for editing; otherwise, you
must enter static IP addresses in the empty address fields.
Subnet Mask.
(Unavailable if
From DHCP
is checked) The IP subnet mask
associated with the
Server IP
address.
Default Gateway.
(Unavailable if
From DHCP
is checked) An IP gateway address
for the network associated with the
Server IP
address.
DNS Server.
(Optional) The address of a server providing DNS name resolution for
that network.
Provisioning.
Enables automatic configuration; should always be checked. If
automatic configuration is not available, the access point will use the
configuration currently stored in flash (nonvolatile) memory.