SkyPilot SkyExtender DualBand, Installation And Setup Manual, Page: 59 / 79

SkyPilot SkyExtender DualBand Installation and Setup Guide 59
know the SSID and are able to configure their client software to connect to the
SSID. (Enable this option for most cases.)
Default Quality of Service.
Use this menu to choose one of three 802.1p Quality of
Service (QoS) levels. The access point does not enforce the selected QoS level; it
simply sets the 802.1p tag for the selected level on all traffic that enters the
WLAN. The mapping of the QoS pull-down options to 802.1p user priority is:
Gold = 6, Silver = 3, and Bronze = 0.
Figure 42. WLAN Details page showing QoS choices
Admin Status.
Check to activate this WLAN. If the box is not checked, the WLAN
will be configured but not yet activated. If the WLAN is not activated, the access
point will not announce or respond to connection requests or other traffic
directed to the SSID.
DHCP Server Type menu
Use the
DHCP Server Type
menu on the WLAN Details page to specify a DHCP
relay or local DHCP server for use by the WLAN. The choices are
None
,
Relay
, and
Server
. Typically, you’ll choose
None
to allow IP addresses to be supplied by a
central DHCP server elsewhere on the network.