Skymsen LT-1,5 BAR, Instruction Manual, Page: 9 / 18

06
3.2 – Feeding Procedure
These blenders work in hight speed (approximately 18.000rpm).
To feed the blender proceed as follows:
- Cut the product in small pieces of up to 2cm size. This process helps on
blending time mainly for frozen products. When triturating ice, it is recommended to
drop some water inside the cup.
- Take out the lid No. 05 (Picture 02). - Place the product to be processed into
the cup No.04 (Picture - 02) with the
-machine switched OFF. - Place the lid back No. 05 (Picture 02) and switch the
machine ON.
3.3 CLEANING
The blenders cup parts are resistant to corrosion, hygienic and easily cleaned.
Before using them for the first time and after each use, take apart the cup pieces (pic.
02) and clean them very well with warm clean water and neutral soap, wipe and dry
them well.
DO NOT WASH ANY PIECES IN A DISH WASHER.
Revise all the pieces frequently before assembling them again. If the blades
are stuck or turn with difficulty, DO NOT USE THE BLENDER. Do a review turning
carefully the blades anti- clock-wise (the opposed edges are sharpened): The blades
must move without difficulties.
Use only original SIEMSEN spare parts which are available at the Authorized
Dealer.
THE USAGE OF DAMAGED OR NOT RECOMMEND SPARE PARTS MAY
CAUSE SERIOUS PERSONAL HURTS OR DAMAGES TO YOUR BLENDER.
See on Page 03 (Pic. 02) all the steps to assemble the cup . NEVER DIP THE
MOTOR HOUSING IN WATER OR ANY OTHER LIQUID.could be exposed to severe
electrical shocks or even to a fatal situation.
IMPORTANT:
Always disconnected the machine from power source before cleaning
Clean base external side with a wet cloth.
Motor has permanent lubrication and does not need any additional lubrication.
ALL MAINTENANCE MUST BE DONE BY DEALERS TECHNICAL
ASSISTANTS.
ATTENTION
Keep the drain tube without obstructions.
SKYFOOD EQUIPMENT LLC - SERVICE
For questions or assistance with products
FLEETWOOD by SKYMSEN and SKYMSEN ,
call SKYFOOD EQUIPMENT Toll Free : 1-800-503-7534 , 24h Customer support, or visit
the Customer Service section of www.skyfood.us .
SKYFOOD’S LIMITED WARRANTY
Unless otherwise specified , new FLEETWOOD by SKYMSEN and SKYMSEN products,
excluding accessories, sold by SKYFOOD EQUIPMENT, LLC. (“SKYFOOD”), for use only
in the continental United States (collectively, “Products” or singularly, “Product”), are
warranted to be free from defects in materials and workmanship for a period of one (1)
year from the date of purchase by the original purchaser/user (“End User”). Several new
products and accessories may be warranted for a period other than one (1) year while
others may be subject to travel limitations, as specified on the products Instruction Manual.
Proof of purchase must be presented; if not this warranty will be VOID. No warranty is
given or implied to a subsequent transferee or any other third party. This warranty is
expressly conditional upon SKYFOOD being notified of any defects in materials or
workmanship within five (5) days of its occurrence, within the warranted time period. If a
notice of a claim under this warranty is timely made by the End User, SKYFOOD or a
SKYFOOD’s designated service company (“Service Company”), will repair or replace the
Product, at SKYFOOD’s discretion, subject to the additional conditions hereinafter
described.
This warranty shall not apply if damage occurs from improper installation or maintenance
performed by an unauthorized service company (“Service Company”), wrong voltage, nor
to the extent that Products or parts have been used other than in conformance with
operating and maintenance instructions, subjected to misuse or abuse or damaged by
accident, acts of God, abnormal use, stress or any other matter unrelated to SKYFOOD,
and beyond its reasonable control.
This warranty does NOT cover service labor and
travel to perform adjustments on products and/or accessories . In addition to wear and
tear of certain items, such as, but not limited to; glass parts, blades, stones, chopper
cutting knives, plates, slicing knives, cutting disc, gaskets, oil changes, sealing tape, heat
seal wires, worm gears, self-lubricating bushings, carbon brushes for electric motors, and
other parts expendable by nature and that need to be replaced frequently.
Electrical
components are subject to natural wear and tear, and are NOT covered by this
warranty.
THIS WARRANTY EXCLUDES ALL ORAL, STATUTORY, EXPRESS OR
IMPLIED WARRANTIES WHICH MAY BE APPLICABLE TO SKYFOOD, INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY AND
FITNESS FOR PARTICULAR PURPOSE.
Under no circumstances shall SKYFOOD be
liable for loss of use, revenue or profit or for incidental or consequential damages.
SKYFOOD shall under no circumstances be liable for any loss, damage, concealed
damage, expense or delay of goods for any reason when said goods are in the custody,
possession or control of third parties selected by SKYFOOD to forward, enter, clear,
transport, or render other services with respect to such goods. The sole and exclusive
remedy for breach of any warranty is limited to the remedies provided in the paragraph
above.
All products held at non-commercial facilities or domiciles, must be taken or shipped,
shipping charges prepaid, either to SKYFOOD's facility or a SKYFOOD's designated