Skymsen LT-1,5 BAR, Instruction Manual, Page: 11 / 18

08
4. General Safety Practices
The following safety instructions are addressed to both the operator of the machine
as well as the person in charge of maintenance. The machine has to be delivered only in
perfect conditions of use by the Distributor to the user. The user shall operate the machine
only after being well acquainted with the safety procedures described in the present manual.
READ THIS MANUAL WITH ATTENTION.
4.1 Basic Operation Practices
4.1.1 Dangerous parts
Some parts of the electric devices are connected to high voltage points . These
parts when touched may cause severe electrical shocks or even be fatal.
Never touch commands such as buttons, switches and knobs with wet hands , wet
clothes and/or shoes. By not following these instructions operator could be exposed to
severe electrical shocks or even to a fatal situation.
4.1.2 Warnings
The operator has to be well familiar with the position of ON/OFF Switch to make
sure the Switch is easy to be reached when necessary. Before any kind of maintenance,
physically remove plug from the socket.
Provide space for a comfortable operation thus avoiding accidents.
Water or oil spilled on the floor will turn it slippery and dangerous. Make sure the floor is
clean and dry.
Before giving any manual command (switch, buttons, turn keys or lever) be sure the
command is the correct one. Check this manual for further details if necessary.
Never use a manual command (switch, buttons, lever) unadvisedly.
If any work is to be made by two or more persons, coordination signs will have to be
given for each operation step. Every step of the operation shall be taken only if a sign has
been made and responded.
4.1.3 Advices
In case of power shortage, immediately turn the machine OFF.
Use recommended or equivalent lubricants, oils or greases.
Avoid mechanical shocks as they may cause failures or malfunction.
Avoid penetration of water, dirt or dust into mechanical or electrical components of
the machine.
DO NOT modify original characteristics of the machine.
DO NOT remove, tear off or maculate any labels stuck on the machine. If any label
has been removed or is no longer legible, contact your nearest dealer for replacement.
READ CAREFULLY AND WITH ATTENTION THE SAFETY OR OPERATION
INSTRUCTIONS LABELS DISPLAYED ON THE MACHINE, AS WELL AS THE
INSTRUCTION MANUAL AND THE TECHNICAL CHARACTERISTICS WRITTEN INSIDE
.
6
IMPORTANT
If any item from the GENERAL SAFETY NOTIONS section is not
applicable to your product, please disregard it.
23
4.6
Manutención
4.6.1
Peligros
Con la maquina ligada cualquier operación de manutención es peligrosa .
DESLÍGUELA FÍSICAMENTE DE LA RED ELÉCTRICA , DURANTE
TODA LA OPERACIÓN DE MANUTENCIÓN .
4.7
Aviso
La manutención eléctrica o mecánica debe ser hecha por una persona
calificada para hacer el trabajo .
La persona encargada por la manutención debe certificarse que la
maquina trabaje bajo condiciones TOTALES DE SEGURIDAD .
5
Análisis y Resoluciones de Problemas
5.1
Problemas , causas y resoluciones .
Las Licuadoras Profesionales fueran diseñadas para necesitar un
mínimo de manutención. Sin embargo pueden ocurrir algunas irregularidades en
su funcionamiento debido al desgaste natural causado por su uso .
Caso ocurra algún problema verifique la Tabla 02 abajo donde están
algunas soluciones recomendadas .
* La vida de servicio - 2 años para la jornada de trabajo normal
* Falta energía eléctrica o
e l e n c h u f e e s t á
desconectado.
* Problema en el circuito
interno o externo de la
maquina.
* Verifique si el enchufe
está conectado, y si hay
energía eléctrica.
* La maquina no prende.
* Llame la asistente
Técnica.
TABLA - 02
Problemas Causas Soluciones