Skymsen 62398.9, Instruction Manual, Page: 12 / 40

12
IMPORTANT
Acid solutions, salty solutions, disinfectants and some sterilizing solutions
(hypochlorites, tetravalent ammonia salts, iodine compounds, nitric acid and
others), must be AVOIDED, once it cannot remain for long in contact with the
stainless steel.
These substances attack the stainless steel due to the CHLORINE on its composition,
causing corrosion spots (pitting).
Even detergents used in domestic cleaning must not remain in contact with the stainless
steel longer than the necessary, being mandatory to remove it with plain water and then
dry the surface completely.
Use of abrasives:
Sponges or steel wool and carbon steel brushes, besides scratching the surface
and compromising the stainless steel protection, leave particles that rust and react
contaminating the stainless steel. That is why such products must not be used for cleaning
and sanitization. Scrapings made with sharp instruments or similar must also be avoided.
Main substances that cause stainless steel corrosion:
Dust, grease, acid solutions such as vinegar, fruit juices, etc., salt solutions (brine), blood,
detergents (except for the neutral ones), common steel particles, residue of sponges or
common steel wool, and also other abrasives.
The following safety instructions are addressed to both the operator of the machine as
well as the person in charge of maintenance.
The machine has to be delivered to the operator in perfect conditions of use by the
Distributor to the user. The user shall operate the machine only after being well acquainted
with the safety procedures described in the present manual. READ THIS MANUAL WITH
ATTENTION.
IMPORTANT
If any recommendation is not applicable to your equipment, please ignore it.
4.General Safety Practices