Assembly & Operation Manual
CONTROL LINKAGES
Flaps : 75mm
Aileron : 65mm
Elevator : 65mm
Rudder : 85mm
Steering: 55mm
WINGS
NOTE:
Make sure to have some sort of protective foam on the work bench. This will
protect the paint surface from unwanted dents. Assemble both wings simultaneously.
Mark
√ each step. If you have chose to only use tailerons on your Mig29, Skip this
section. Glue flaps and ailerons permanently using aeropoxy. Make sure the control
surfaces are all lined up before glue set.
Remove servo covers
Inspect plywood mounts. Use CA to glue mounts if needed.
Check operation of Flaps and Ailerons.
Trim if needed. Make sure surfaces move freely.
Check Kevlar hinges for any cracks.
Trial fit wings to fuselage.
Cut slot in root for servo wires.
P-11
Photo 9
