Assembly & Operation Manual
NOSE GEAR & DOORS
NOTE:
If you have purchased the
ARF PLUS PRO KIT
proceed to page 19. On the
pro kit all doors and LG already installed. Work on a secure and protective surface.
This will protect the paint surface from unwanted dents. Mark
√ each step.
Landing gear blocks should have all have blind nuts installed already by factory.
Trial fit nose leg to mount. Make sure actuator move gear fully up and down.
Make sure no binding of gear to fuselage.
Remove actuator from gear. Fit steering servo to. Centre servo and fit pushrod. Fit
air tubing to nipples. Secure nose leg to mounts with 4 bolts.
Locate 2 nose gear doors. Align and sand to fit.
Glue hinges to doors. Trial fit and glue to fuselage. Make sure it operates correctly.
Glue cylinder mounts to door. Trial fit cylinders and secure in position.
P-15
Photo 21
Photo 22
Photo 23
Photo 24
Photo 25
Photo 26
