COCKPIT AND CANOPY (a er pain ng)
P-24
Assembly & Operation Manual
Check free operation of sliding canopy.
Plumb air line and fit 2 x quick
disconnects.
Fit rear cockpit to sliding floor.
Trace the shape of rear canopy and cut
to fit. Glue with canopy glue.
Trace front canopy and cut to fit. Glue
with canopy glue. Check operation of
sliding canopy.
Cut rear cockpit frame to clear cockpit
tub ( photo 61)
Cut front canopy frame to clear cockpit
tub (photo 62)
Slide cockpit in place. It sits on inlet duct.
Fit canopy. Check free sliding of frame.
Photo 58
Photo 63
Photo 61
Photo 59
Photo 60
Photo 62
Photo 64
