FUSELAGE REAR & FRONT
Make sure you have a good stand for fuselage. You will need to assemble the rest of the
F104 on this stand. The f104 rear section is design for easy removal during transport.
Before joining the fuselage it is necessary to tidy up
the servo wires. Make sure wires are secure and will
not touch the tailpipe.
Slide tailpipe into rear section. Fit L-brackets. Drill
holes in formers and fasten L-brackets to formers.
.
Align fuselage and secure with 4 x M5 clamps. Check fit
all around seem for sound joined.
Route 2 servo wires along inner skin of rear fuselage.
Install servo male and female plugs for 2 servo wires.
For easy removal of rear section I recommend that the 2 wires are joint via a male
female plug.
Run speed brake air tubing along fuselage.
Fit quick connector where the fuselage splits.
Install JR DS8511 steering servo. Bolt with 4 x M3
bolts and lock nuts.
Centre servo and install pushrod.
Check operation of gear doors.
P-17
Assembly & Operation Manual
Photo 33
Photo 34
Photo 35
Photo 36
Photo 37
Photo 38
