Congratulations on your purchase of Skylink Garage Door Opener, a garage door opener with many
innovative features. Features include extremely quiet operation with DC motor; automatic force
adjustment so the door can be closed with just the right amount of force, not overpowered; state of
the art safety reversal systems that protect your family and property near the door.
Important Safety Information
This documentation provided with your opener has been carefully designed and organized to make
the assembly, operation and continued maintenance of your product as easy and safe as possible,
provided it is installed, operated, maintained and tested in strict accordance with the instructions
and warnings contained in this manual. Read and follow all guidlines and operating instructions
before the first use of this product. Store the manual in a safe, easily accessible location.
Safety Symbol Overview
WARNING
•
This type of warning symbol is used to indicate possible mechanical hazards that may cause
serious injuries or death.
CAUTION
•
This type of warning symbol is used to indicate the possibility of damage to the garage door or
opener.
Check the following items before assembling the opener:
•
Identify the door type: sectional door or one-piece jamb door.
•
Ensure your garage door is balanced and is not sticking or binding.
•
Here is how to check the door balance:
° From outside the garage, slowly open the door all the way and close it all the way – DOOR
SHOULD NOT BIND OR RUB.
° Raise the door halfway up – DOOR SHOULD STAY IN PLACE, SUPPORTED ENTIRELY BY ITS
SPRING.
IMPORTANT
•
IF THE GARAGE DOOR FAILS EITHER OF THESE TESTS, HAVE A QUALIFIED GARAGE DOOR
PROFESSIONAL ADJUST OR REPAIR THE DOOR.
•
If the garage door is lightweight (made with frame and skin, not solid), it must be braced or
reinforced before installing the opener (including the door frame). Check with a qualified service
professional for a door reinforcement kit.
•
If you do not have an access door in addition to the garage door, you should install an emergency
key release kit.
•
If your door is more than 7’ (2.1 m) high, you will need a rail extension kit (sold separately).
•
With the garage door closed, check alignment of door and garage floor. The gap, if any, should be
no more than 1/4” (6 mm). If the gap is larger than this, repair floor or door before installing
opener.
Sectional Door
One -Piece Door
INTRODUCTION
INTRODUCTION
PRE-INSTALLATION CHECKLIST
PRE-INSTALLATION CHECKLIST
3
3
4
4
Summary of Contents for ATOMS ANR Series
