Page 164
December 2007
Telescopic Boom Series
Models SJ61T & SJ66T
194312
Section 5 - Procedures
Service and Maintenance
Platform and Jib Boom Removal
Before removing the platform and jib boom from the
machine, the electrical harnesses routed across the
platform swivel joint must be disconnected.
M62018AA
Electrical Harness at Platform Swivel Joint
Procedure:
1.
Disconnect the two 24-pin control cables from the
bottom of the control box.
M62067AA
24-pin Control Cables
2.
Remove the auxiliary AC receptacle box (as
equipped) if its harness is bundled with the other
harnesses. Remove the harness clamps.
M62191AA
Auxiliary AC Receptacle Box
3.
Open the control console lid to disconnect the jib
and platform rotate harness.
4.
Remove tie wraps and make note of wire labels
for reinstallation. To release each wire, insert a
small flat screwdriver into the slot beside it in the
terminal strip.
5. To release each wire, insert a small flat screwdriver
into the slot beside it in the terminal strip.
02
02
02
60/04
20D/41
34A/34
34A/35
36A/36
36A/37
82-/118
M62321AA
Control Console
Summary of Contents for SJ61T
