Skyjack SJ40 T+, Operation Manual

Page: 37 / 130

SJ40 T+, SJ45 T+, SJ61 T+, SJ66 T+ 213201ACA
37
Optional equipment and attachments Section 3 – Familiarization
3.5-4 Cold or arctic weather package
The battery warmer (cold and arctic), hydraulic oil
heater (arctic), and engine oil heater (arctic) cables
are in the engine compartment near the engine.
1
7
1
Cold package battery warmer cable: Connect
this cable to an AC socket for a minimum of
4 hours before you start the engine when the
temperature is below -10°C (+14°F).
7
1
Arctic package battery/hydraulic oil/engine
oil heater cable: Connect this cable to an AC
socket for a minimum of 4 hours before you start
the engine when the temperature is below -18°C
(0°F).
3.5-5 Tool Tray
The tool tray attaches to a corner of the top platform
railings with lock-pins.
1
2
7
1
Tray: The tray holds tools.
7
2
Lock-pins: The lock-pins secure the tray to the
railings.
3.5-6 Glazier
The glazier tray attaches to the kickplate of the
platform. Refer to the glazier operation manual for the
correct operation and maintenance.
3
2
4
1
7
1
Strap: The strap holds the panel in position.
7
2
Foam Support: The foam support gives
protection to the panel.
7
3
Glazier Tray: The tray holds the panel.
7
4
Derate Switch: This switch controls the platform
capacity.
WARNING
Tip-over hazard. When required by Skyjack-
approved attachment or modifications, use the
capacity derate switch. If you do not obey, there is
a risk of death or serious injury.
IMPORTANT
The platform capacity changes with the boom
position or capacity derate switch position. The
indicator lights on the base and platform control
consoles show if the platform is in the high or low
capacity zone.
F
A
M
IL
IA
R
IZ
A
T
IO
N