Skyjack SJ12, Operation Manual

Page: 34 / 84

34
SJ12, SJ16 213721AAA
Section 4 – Inspections Before Operation Visual and daily maintenance inspections
4.2-6 Platform assembly
Do the inspection that follows in sequence:
WARNING
Fall Hazard. Use the three points of contact
principle when you use the MEWP to enter or exit
the platform. If you do not obey, there is a risk of
death or serious injury.
1. Enter the platform and close the gate.
1
Platform railings
▪
Make sure there are no loose or missing parts,
and there is no visible damage.
▪
Make sure that all railings are correctly
installed.
▪
Make sure that all fasteners are tight.
▪
Make sure that the gate is in good condition
and operates correctly.
▪
Make sure that the platform foot pedal is in
good working order and that it has no loose or
missing parts and there is no visible damage.
2
Fall-protection anchorages
▪
Make sure that the fall-protection anchorages
are correctly attached.
▪
Make sure the fall protection anchorages show
no signs of visible damage, deformation, or
cracks.
3
AC power socket
▪
Make sure that the socket is free of dirt or
blockages.
4
Platform control console
▪
Make sure the control console is locked with
lock-pins.
▪
Make sure the platform control cable is
correctly locked, and there is no visible
damage.
2. Exit the platform, and close the gate.
5
Manual storage box
▪
Make sure that the operation manual and
other important documents are in the manual
storage box.
▪
Make sure that the documents are in good
condition, and you can read them.
▪
Always put the manuals and other documents
back in the storage box after use.
1
4
3
5
2