60
6 DIAGRAMME ÉLECTRIQUE
F N
ÉMERGENCE
1
2
NF
NC
1
2
NF
NC
ATTACHÉ
3
4
NA
NO
1
2
NF
NC
3
4
1
2
DÉTACHE
RESEAU ÉLECTRIQUE
230V/60Hz
SENSEUR
SENSEUR
M1~
PROTECTEUR
THÉRMIQUE
T1
T4
T4
SENSEUR
SENSEUR
1L1 3L2 5L3 13 A1+
2T1 4T2 6T3 14 A2-
CONTACTEUR
SENSEUR
SENSEUR
9
The Blade Scraper
This scraper cleans the bone dust or the residues from the blade during the opera on. The
scraper may be removed for cleaning (see item 3.3 cleaning).
2.2.7 Lower Wheel
The Lower Wheel #. 16 (Pic.01) is assembled on the lower bearing sha and
fi
xed by the
staple #. 10 (Pic.01). The staple shall always be placed in the sha slit.
The lower wheel may be removed for cleaning a er removing the blade.(see item 3.3
Cleaning).
2.2.8 Upper Wheel.
The Upper Wheel #.05 (Pic.01) frame has its own sha and bearings.
Therefore the Upper Wheel has to be removed with the sha and bearing for cleaning (see
item 3.3 Cleaning), only a er the Blade has been taken o
ff
.
3. OPERATION
3.1 Pre-Opera on
3.1.1 Check if the saw is standing
fi
rm in its posi on
3.1.2 Adjust the Blade Guide # 07 (Pic.01) height to meet the meat piece thickness.
3.1.3 Doors and Blade Guard
The upper door #.04 (Pic.01), the Lower Door #. 15 (Pic.01) and the Blade Guard #17
(Pic.01) shall be closed and in their right posi on while the saw is opera ng...
3.1.4 Thickness Guide
To obtain several slices with the same thickness, adjust the Thickness Guide #.13 (Pic.01) as
desired. Turn the Thickness Guide Handle counter clockwise loosing the Thickness Guide,
and drive it to the desired thickness. Then ght back the handle.
3.1.5 Control Board.
The ON/OFF Switch # 02 (Pic.01) and the Emergency Bu on Switch #.03 (Pic,01) are placed
on a control board, on the motor housing upper front side.
To turn ON the saw press the ON/OFF Switch (green) bu on to posi on “I”..
To stop the saw opera on press the ON/OFF Switch (red) bu on to posi on ”O”.
If an emergency case arises, press the EMERGENCY bu on, immediately stopping the saw
opera on.
3.2 Opera ng process
Before to start the Saw
- Pull totally the Movable Table # 09 (Pic.01) toward the saw front side..
