05
3 Operation
3.1 Head assembling
IMPORTANT
Note the correct position of each Head's internal components. Assembling the
components in a different order could cause serious damages to the Head.
To assemble or disassemble the Head's internal components follow the
below sequence:
Picture - 03 (with dual cut)
01- Head
02- Fiber Washer
03- Worm
04- Worm Pin
05- Pre cutting plate
06- Double knife
07- Plate 3mm or 5mm
08- Locking Ring
09- Ring
2.3 Feeding Procedures
IMPORTANT
Under no circumstances use your hands or any other kind of instrument to
push meat into the feeding throat. Use only the Stomper Nº05 (Pic.02) to do
this operation.
The processed meat has the function of lubricating and cooling the Head's
internal components. Therefore do not run the machine without load, as it
would warm up and damage the internal components
.
The Meat Grinder Model PSE-32HD is a relatively fast machine, therefore
they need equally be fed fast .
To feed the Meat Grinder place pieces of boneless meat on the Pan Nº04
(Pic.02) and drive them with your hand towards the feeding throat entry only, then
use the Stomper Nº05 (Pic.02) to push them into the feeding throat where they will
be naturally sucked in by the worm.
02
01
03
04
07
06
08
05
09
