Switching
MY SKY HDi
on and off
Whenever you are not using MY SKY HDi you should put it into standby.
You should not unplug it or switch it off at the power point, unless
instructed to do so.
To put MY SKY HDi into standby, press
S
.
The standby light on the front panel shines
red
.
To take MY SKY HDi out of standby and switch it on, press
SKY
(or
S
again).
The standby light on the front panel shines
blue
.
Note
You can also press
guide
,
box office
,
active
or
planner
to take MY SKY
HDi out of standby.
Changing channel
You can change the channel by using:
the
ch +
and
ch -
buttons;
the
number
buttons (channel numbers are always three digits, for
example press 008 to select channel 8);
the
back
( ) button to remove any on-screen display, then, when
the screen is clear, press the
back
( ) button again to take you to
the previous channel you were viewing; or
one of the on-screen methods described in the following sections.
When you change channel, a banner (the i-search banner) appears briefly
to show information about the channel. It automatically disappears after a
few moments, or you can press
back
( ) to remove it immediately.
For more information about the i-search banner, see page 7.
Blocked channels
Sometimes you might change channel to a blocked channel or programme.
This means the channel or programme has been restricted by your
Parental Control settings, so you will not be permitted to view it simply by
changing channel to it.
To unblock the channel or programme, you will need to enter your PIN.
For more information, see page 46.
Changing the volume
To change the volume, press
vol +
or
vol -
.
To turn the sound on or off, press
mute
(
c
).
❖
◆
◆
❖
◆
◆
◆
◆
❖
◆
◆
Getting started
GETTING
ST
AR
TED
Summary of Contents for my hdi
Page 87: ...83 Notes ...
Page 88: ...84 Using MY SKY HDi Notes ...
