4O3A Signature – Antenna Genius User Manual
Page
30
of
55
Device Uptime
Time since last device power cycle or reboot
Hardware Version
Self-explanatory
Firmware Version
AG firmware is upgradable so that new features can be added over
time, see section 9.3 below for instructions on updating your AG
firmware
Firmware Date
Date that corresponds to your AG’s firmware revision
MAC Address
Me
dia Access Control Address, also known as the physical address, a
unique identifier assigned by the manufacturer to network interfaces,
cannot be changed by user
Source
IP address assignment method: DHCP or manual
IP Address
Internet Protocol Address, a numerical label assigned to each device
participating in a computer network that uses the Internet Protoco for
communication, AG uses IPv4 addresses set by DHCP or manually
Subnet Mask
Set by DHCP or manually, usually 255.255.255.0
Default Gateway
The LAN address of the router, set either by DHCP or manually
Port A Mode
Control method for Radio Port A as set by DIP switches, either LAN,
GSD, BCD or PTP.
Port A Band
Current band detected for Port A Radio
Port B Mode
Control method for Radio Port A as set by DIP switches, either LAN,
GSD, BCD or PTP.
Port B Band
Current band detected for Port B Radio
9.3.
Is your firmware up-to-date?
If the firmware on your AG is older than the latest AG firmware, you should update your AG
before proceeding to the rest of the setup sets.
The firmware version should always match the app version.
Since version 3.03 the firmware file is included into the app. There is no need to download a
separate file anymore.
Before updating the firmware, you should make sure you have the latest version of the AG
Windows app by checking the 4O3A.com Downloads page. Updating the app is simple, just