4O3A Signature – Antenna Genius User Manual
Page
26
of
55
Hit
Finish
to launch Antenna Genius Windows App:
9.1.3. Using DHCP to set the network address
AG comes factory preset for DHCP. If there's no DHCP server the fallback address is
192.168.1.140.
It is recommended to use your network’s DHCP server (Dynamic Host Configuration Protocol),
which is built into an Ethernet switch or DSL router on most home networks.
In case you are having problems getting an IP address, you can try resetting the network
configuration on your AG:
1.
make sure AG is connected to LAN with a DHCP server that will assign an IP address (in
home networks, typically an Ethernet switch or DSL router)
2.
remove DC power from AG