15
14
Flying Tips & Features
Tips for Safe Operation
• It is recommended to only fly in large, open spaces that are free of obstacles like
power lines, trees, ceiling fans, etc.
• When flying indoors, avoid walls and ceilings, as the craft will be drawn towards them
if closer than 2-3 feet.
• Stand behind the craft when first taking off, so that you and the craft are facing the
same “forward” direction. This will help with orientation when the craft is airborne.
•
Remember:
the blue LED navigation lights indicate the front of the craft.
• Novice pilots should move the controls slowly and deliberately to get used to the
craft’s flying characteristics. Try using one control at a time.
• Practice basic flight operations like take off, hovering, and landing.
• If you crash, power down the engines IMMEDIATELY to reduce the chance of damage
or injury.
• If anything obstructs the propellers for any reason, throttle down IMMEDIATELY and
safely clear the obstruction. Check for possible damage before flying again.
Speed Setting
Press the
Speed button
on the remote control once to set the craft’s speed.
•
Low:
Provides smooth and predictable control of the craft. The remote will chime once
to indicate the low speed setting.
•
Medium:
The craft will move and respond faster to all control inputs. The remote will
chime twice to indicate the medium speed setting.
•
High:
Highest setting for maximum performance. The remote will chime three times to
indicate the high speed setting.
Auto-take off/Landing
Before attempting Auto-take off/Landing, be sure that there is ample clear space
around the craft, ideally 9-10 ft. in all directions. It is not recommended to attempt
Auto-take off/Landing around or through any obstacles, as this may result in
unintended damage.
Press the
Auto-take off/Landing
button. The craft will automatically begin to
hover about 4 feet from the take off point.
Flying Tips & Features
Auto-take off/Landing Button
