![sky rider DRW241 User Manual Download Page 12](http://html1.mh-extra.com/html/sky-rider/drw241/drw241_user-manual_1289828012.webp)
23
22
3D Mode
VR Mode splits the phone’s screen for use in a VR headset.
Press the 3D button
on the
screen to turn this feature ON or OFF. Use VR Mode to give a friend a fully immersive, point-
of-view flying adventure.
NOTE:
• On screen flight controls are locked out in VR Mode. You must have the regular remote
connected in order to fly the craft.
•
We do not recommend flying the craft while wearing a headset.
The craft’s
camera has a limited forward view and the headset will completely obscure the
user’s peripheral vision and situational awareness.
Pilots assume all risk and are
responsible for any damage caused by improper use.
If you are experiencing problems using or flying the craft, consult this table.
Troubleshooting
PROBLEM
POSSIBLE CAUSES
SOLUTION
Craft does not
respond to controls.
• No power to remote
or craft.
• Poor contact between
power plugs.
• Craft is out of range.
• Check remote batteries,
replace if needed.
• Check craft battery, be
sure it is fully charged.
• Be sure the power plugs
are firmly connected.
• Be sure the remote has
an unobstructed line of
sight to the craft.
• Remain within the
remote’s 65 ft. range.
Craft is difficult
to control or flies
erratically.
• Gyroscopes may
be misaligned.
• Recalibrate gyroscopes
(see pg. 13).
• Power OFF remote and
craft and reconnect
(see pg. 10).
Craft drifts
while in flight.
• Trim not set or needs
adjustment.
• Adjust trim settings
(see pg. 12).
Craft suffers from
mechanical trouble.
• Damage to body,
rotors or other major
components.
• Repair or replace parts
as needed.
LED lights ON but
craft does not
respond to controls.
• Low battery power.
• Recharge the battery.