13
12
Trim Adjustment
Setting Trim & Countering Drift
Even after the craft is calibrated, it may show a tendency to drift while airborne. Adjusting
the trim will help counter this effect and allow for better control the craft.
• To avoid potential damage, adjust the trim while attempting a stable hover.
• Try to avoid making any exaggerated movements with the flight controls.
• Adjust one trim setting at a time to avoid confusion.
Remember, the white rotors and LED lights indicate the front of the craft.
Adjusting the trim will help with drift but it will not entirely eliminate it. Turbulence and
other factors may still influence the craft’s flight characteristics.
If the craft is spinning clockwise by itself,
you may need to use the left trimming
button to counter this movement.
If the craft is spinning counter-clockwise
by itself, you may need to use the
right trimming button to counter this
movement.
Adjust
Yaw Trim
.
Gyroscope Recalibration
If the craft is experiencing difficulty flying or is behaving erratically, it’s gyroscopes may
need to be recalibrated. Do not attempt to do this while flying, safely land the craft first and
place it on a flat surface. The craft and the remote should already be linked together.
Simultaneously push the
Left Control Stick
fully downward and the
Right Control Stick
down and to the left as shown in the figure. Wait for a chime to sound,
when this chime has
sounded the craft is recalibrated.
Trim Adjustment
