21
20
Sky Rider Cruise App
Using the Remote & App Together
It can be easier to capture photos and video by using the remote to fly the drone and using
the app in a viewing only method. Use the app and the remote together by attaching the
smartphone holder (included) to the remote and placing your phone in the holder.
Follow the steps below to connect to the remote and the app in the proper sequence.
•
First, connect the remote to the craft like normal.
Connecting the remote first
overrides any control signals from the app.
• Next, use your phone to connect to the craft’s Wi-Fi. Open the app and go to the Flight
Screen. Leave the Flight Controls off for the best view from the drone’s camera.
•
Use the controls on the remote
to fly the craft while the Wi-Fi camera streams to
your phone.
• When you’re finished flying, power down the remote and craft like normal.
ROTOR -B
1
2
1
2
ROTOR -A
Parts & Repair
REMINDER: Pilots are responsible for any damage caused by improper use.
Parts Replacement
Standard parts such as extra batteries and remotes are available online for purchase when
in stock. However, any non-standard parts such as cameras, screws, bodies, etc. can be
ordered by placing an inquiry with our parts department at:
Rotor Replacement
The craft comes with replacement rotors if the originals are broken or badly damaged. Use
the included screwdriver to remove the rotor retaining screw that holds the rotor to the
motor shaft. Once the retaining screw is out, pull upwards on the rotor to remove it from
the motor shaft. Installation of the new rotor is the reverse of the removal process. Be sure
to tighten the rotor retaining screw firmly, but do not over tighten.
It is extremely important to use the correct rotor (A or B) for replacement.
Using the
incorrect rotor will make the craft impossible to control. The marking can be found on the
rotor near the shaft.
Push the release latch and
pull up on the antenna to
remove it.
