SKS-Kinkel il vetro Installation Instructions Manual Download Page 22

 

SKS-Kinkel Elektronik GmbH 

EN 

il vetro Audio hands-free 

 

 

 

 

 

 

 

Support-Hotline: +49 (0) 2661 98088 112 

- 22 - 

Version: 2.1 

E-Mail: [email protected] 

 

Document art. no. 97010301 

 

Service 

 
Statutory  provisions  for  warranty  shall  apply.  (See  general  terms  and  conditions  in  the  appendix  or  the  internet  at 

www.sks-

kinkel.de/agb/

). 

 

Warranty 

 
Our customers and electricians are offered a simplified settlement process of the warranty claim. For more information on this 
please refer to the terms and conditions on our internet page or contact the SKS support hotline. 
 

Disposal instructions 

 

 
By separately disposing of electrical and electronic devices you will allow for the reuse, renewing and recycling of materials and 
used  appliances  and  equipment.  At  the  same  time  this  separation  shall  prevent  negative  effects  of  the  possibly  existing 
dangerous substances and materials on the environment and public health. Dispose of the packaging in the respective separate 
containers for cardboard, paper and plastics. 
The products comply with the regulatory requirement, in particular with electrical and electronic equipment act and the REACH-
regulation.  (EU-

 

guideline  2012/19/EU  WEEE  and  2011/65/EU  RoHS).  EU-REACH-  regulation  and  the  law  implementing 

regulation (EG) Nr.1907/2006). 
 

Liability disclaimer 

 
We have checked the content of this document to verify that it corresponds to the hard- and software described herein. There 
may,  however,  be  deviations  and  SKS-Kinkel  GmbH  may  not  be  held  liable  for  a  lack  of  conformity.  The  information  in  this 
document is checked regularly and necessary changes are made in subsequent issues. 
 

Care instructions 

 
Please just clean the device unit with a soft cloth, moistened with a mild soap solution. Dry cleaning, aggressive detergents  and 
abrasives may damage the surface. 
 

Service and support 

 
Our support team provides practical assistance and advice. SKS support may be reached via email or phone. When contacting 
us please provide an exact description of the fault, the project name your name and your customer ID. 
 
We provide the following options: 
 

 

 

SKS-Support Hotline 

+49 (0) 2661 98088 112 

SKS-Support E-Mail 

[email protected] 

 
Support  is  exclusively  provided  for  electricians,  architects  or  planning  offices.  End  customers  are  asked  to  contact  their 
electrician. 
 

Address 

 
 

 

SKS-Kinkel Elektronik GmbH, Im Industriegebiet 9, 56472 Hof/ Westerwald 
Tel.: +49 (0) 2661 980 88 0, Fax: +49 (0) 2661 980 88 200 
E-Mail: [email protected], www.sks-kinkel.de 

 

 

 

Do not dispose of the device with the regular household refuse but take it to a collection point for electronic 
scrap. The respective collection point is provided by the municipal administration in the area.

 

Summary of Contents for il vetro

























Reviews: