SKS-Kinkel Elektronik GmbH
EN
il vetro Audio hands-free
Support-Hotline: +49 (0) 2661 98088 112
- 17 -
Version: 2.1
E-Mail: [email protected]
Document art. no. 97010301
3.5
Connection
SKS 2-wire-audio-bus
The il vetro Video indoor station is connected to the audio part of the 2-wire
video bus via the terminals
a+/b-.
The audio signal for the 2-wire bus is at the terminals
a+/b-
.
The terminals
a+/b-
supply 19 - 25 VDC for the il vetro Audio indoor station.
The terminals
E+/E-
may optionally be used for floor buttons (normally open
contact).
Note that the il vetro Audio indoor station is in calibration mode for 25 seconds after the first start.
Do not touch the touchscreen during the calibration process, otherwise an error-free function of the touch buttons
can no longer be guaranteed. You can hear a tone, when the calibration process is completed
