SKS-Kinkel Elektronik GmbH
EN
il vetro Audio hands-free
Support-Hotline: +49 (0) 2661 98088 112
- 16 -
Version: 2.1
E-Mail: [email protected]
Document art. no. 97010301
Set the SKS bus call address at the DIP switch on the back of the il
vetro Audio indoor station. Each address is assigned to a bell button
at the door station. The SKS bus table of call addresses can be found
in the appendix.
Pay particular attention to the setting of the DIP switch when the
indoor station is replaced!
Subsequently plug the terminals into the il vetro Audio indoor station.
Remount the il vetro Audio indoor station in the upper part of the
supporting frame.
Subsequently press the il vetro Audio indoor station onto the frame
until it clicks into place.
3.4
Disassembly of the indoor station
Use a screwdriver to release the il vetro Audio indoor station from its
supporting frame. This is done by inserting the screwdriver into the
release opening at the bottom of the il vetro Audio indoor station.
Carefully remove the il vetro Audio indoor station from the support
frame as shown in the drawing.
Pull the lower part of the il vetro Audio indoor station towards you and
carefully lift it upwards.
