background image

DOL 278T

Technical Manual

7

3 Product survey

134692 DOL 278AMT-1 EmergencyOpen Temp Medium 4.2A

Temperature-controlled emergency opening in a one-house version.

Max. power consumption: 4.2 A

Battery: 4 Ah

Two temperature sensors are included (1 inside temperature 1
outside temperature sensor).

134693 DOL 278AMT-2 EmergencyOpen Temp Medium 4.2A

Temperature-controlled emergency opening in a two-house version.

Max. power consumption: 4.2 A

Battery: 4 Ah

Three temperature sensors are included (2 inside temperature s 1
outside temperature sensor).

134694 DOL 278ALT-1 EmergencyOpen Temp Large 8A

Temperature-controlled emergency opening in a one-house version.

Max. power consumption: 8 A

Battery: 7 Ah

Two temperature sensors are included (1 inside temperature 1
outside temperature sensor).

134695 DOL 278ALT-2 EmergencyOpen Temp Large 8A

Temperature-controlled emergency opening in a two-house version.

Max. power consumption: 8 A

Battery: 7 Ah

Three temperature sensors are included (2 inside temperature s 1
outside temperature sensor).

134792 Mini-UPS, Mini-Power, Universal

Five minutes' battery backup of house computer via emergency opening
battery.

For fitting or retrofitting in a emergency opening unit.

Used in areas where 230V mains failures frequently occur.

Use one Mini UPS per house controller.

Two Mini UPS can be mounted in an emergency opening unit.

134784 DOL 278 connecting cable 354 cm

The cable is used to connect the emergency opening to the house con-
troller if the supplied 134 cm cable is not long enough.

Summary of Contents for DOL 278T





























Reviews: