Skov DA 3800, Mounting Manual

Page: 20 / 52

DA 3800 Flange Inlet
20 Mounting Guide
3.4.8 Pointing
SKOV A/S recommends Sikaflex AT Connection or MS polymer single-component or similar.
If the wall gasket is chosen, it can in most cases re-
place the manual point process. See section Wall gas-
ket [
}
33] .
Complete by applying a sealing edge both internally
and externally when the foam is dry.
Point flat the surface of the pointing.
If the distance between the wall and the edge of the in-
let exceeds 6 mm, you can use a sealant tape to seal
up with before placing the pointing.