Skov DA 3800, Mounting Manual

Page: 14 / 52

DA 3800 Flange Inlet
14 Mounting Guide
3.4.2 Mounting clamp for the pull rod
Twist the wedges off. Keep them, so they are ready for
later use. See section
Oblique walls [ } 18] .
For AFC inlets, remove the activation lever. Keep them,
so they are ready for later use. See section
Mounting
the activation lever [ } 17] .
Parts in a bag and where they are used
Picture Num-
ber
Type Application
1
DA 3800 bracket for the pull rod.
Used in section, Mounting clamp for the
pull rod [ } 14] .
2
PT screw 5x16, flange, TX25.
Tightenedwith 2 Nm
1
Tunnel inlet, bushing L= 17.5.
Used in section, Mounting pull rod and reel
[
}
22] .
1
DA 3800 reel ø12/18/28x12.4.
1
DA 3800 clamp for the pull rod.
Used in section, Spring unit on pull rod
[ } 26] .
1
Tapping screw 4.8x32 TX25.
Tightened with 3Nm.
1
Washer ø4.3/ø15x1.
1
DA 3800 safety strip for flap
Used in section, Mounting safety strip
[
}
17]