Skope SK650-2, Operating And Service Manual, Page: 9 / 57

9
SK650-2
SKOPE Gen2: Single Door Chiller
2.2 Operation of Machine
Plug in the cabinet and check operation of the refrigeration unit,
electronic controller and cabinet lights.
Refrigeration unit
The compressor and evaporator and condenser fans should all
operate initially. This may be verified by listening for compressor
switch on, and checking for air circulation inside the cabinet.
The compressor and condenser fan should switch off when the
cabinet internal temperature reaches approxi2°C, and on
again at approxi4°C. The internal cabinet air will continue to
circulate at all times.
Electronic controller
The electronic controller will either display the internal cabinet tem-
perature or the controller set point. The compressor ‘on’ LED will
indicate that the compressor is operating (see Figure 2 on page 12).
Cabinet lights
The lights which illuminate the top sign and cabinet interior are
initially on, and will stay on permanently. The lighting will require a
period of time to stabilise following initial start up.
OPERATION
2