6
Installation
User Manual
SKOPE Backbar, Counterline & Slimline
Locating the Cabinet
Location
When positioning the cabinet, avoid direct sunlight and warm draughts etc.
The cabinet must NOT be situated where it is affected by warm or hot air
from adjacent equipment, as this will compromise the airflow and
performance of the chiller.
The cabinet must be positioned on a level surface for the doors to shut and
seal correctly, and to prevent the condensate tray from overflowing.
Adequate allowance should be made for door opening.
Always ensure that the top of the cabinet is shielded from impact and
moisture, with either a SKOPE provided bench top, or with a custom or
existing bench top.
When installing the cabinet
Avoid direct sunlight and warm draughts etc.
Allow adequate space for the doors to open fully.
Ensure the cabinet is positioned on a level surface so the doors shut
and seal correctly and to prevent the condensate tray from overflowing.
Ventilation
For efficient operation of the chiller, it is essential that adequate ventilation
be provided around the front of the refrigeration unit. Normal operating
conditions should not exceed the operating temperature range (see page 4).
It is critical that the hot refrigeration exhaust air is not restricted and that it
can easily flow out and away from the front of the cabinet. Never store
cardboard cartons or other items in front of the refrigeration unit. The
ventilation slots on the unit front cover must be kept clear at all times.
Power Supply
The chiller is supplied with a flexible power cord and plug, which is located
at the rear of the cabinet.
Before final positioning of the cabinet, pull the power cord out from the
cabinet and connect to the power supply.
WARNING:
Do
NOT
overload the power supply. See the rating label inside
the cabinet for power supply and current draw.
