15
SKOPE Backbar, Counterline & Slimline
Servicing
User Manual
Lighting
Cabinet
Interior Lights
The cabinet is fitted with cabinet interior light/s mounted above the doors on
the ceiling of the cabinet. Backbar pass-through cabinets are fitted with
lights above the front and back doors. Refer to the table below for light tube
specifications.
Interior light specifications
To replace the interior LED light tube
Type
LED Tube Specification
Two door cabinet
20 Watt T8 Frosted LED tube (Ø26 x 900mm, 5500K)
Three door cabinet
24 Watt T8 Frosted LED tube (Ø26 x 1500mm, 5500K)
Four door cabinet -
Counterline & Slimline 20 Watt T8 Frosted LED tube (×2) (Ø26 x 900mm, 5500K)
Four door cabinet -
Backbar
24 Watt T8 Frosted LED tube (Ø26 x 1500mm, 5500K)
1. Disconnect the cabinet from the power supply (see page 14).
2. Remove the top light
diffuser by squeezing it
until it is released from the
housing.
3. Rotate the LED tube until
the pins on the ends of the
tube align with the slots,
then slide it out.
4. Fit a new LED tube and
clip the diffuser back into
place. When fitting
vertically mounted LED
tubes, ensure the tube is
fitted with the ‘Power’ end
at the top.
