Page 36 of 56
SKIPPER
Electronics AS
Edition: 2021-09-16
ESN100 Operation and Installation Manual
Chapter: ESN100 Screen functions
Selectable Information
All the buttons on the side and bottom can be selected This information can be made to disappear after a
short time. This can be recalled by touching the screen
Auto Functions
If the system is in Auto mode then the system will change the range and signal settings automatically, as the
depth changes. If the user decides to take control of one of the auto parameters the system will inform that
it is taken out of Auto mode and the user then has full control. The system can again be put into auto mode
using on screen button (if selected), by pressing and holding a parameter, or within the menus.
Manual mode
In Manual mode, the user will typically be required to control the Range, and gain of the system, although it
is also possible to control the power and time variable gain (TVG) to give a clearer picture.
The system can be made to show the information/ options, or to hide it until the user touches the screen.
(in Runtime screens)
