Skipper EMES60, User Manual

Page: 26 / 40

25
4.4 Echosounder alert configuration screen (screen 3)
Note that this screen is only available with Administration privileges, ref 3.6
Screen layout
When a value that is measured by the system goes out of limits or failure mode occurs, an
alert is issued. This screen allows setting the individual alert ID’s for different alert events,
and assigns the relay (totally 2 relays) to the particular alert event.
Alert list
Generic alert list – ref 3.8.2
List of the alerts specific for the echosounder
Shallow alarm Present depth value is less than the shallow alarm limit
Deep caution Present depth value is greater than the shallow alarm limit
Lost bottom caution Echosounder cannot detect bottom (for example – too deep)
Alert ID and Relay controls
Freeze alarm display
Current depth
Disable audio alarm
Alert history (alert monitoring window)
List of all available alert types;
Indicated in red if alert condition exists
GNSS and THD data, ref 3.3
Alert settings: touch Alert button to set alert limits;