22
Changing digital indicator settings
Touch the Digital Indicator area to show a control menu,
which allows you to change the values that are shown.
Touch the corresponding box to show a list of available
selections.
Depth ref(erence) selections are:
•
Below transducer: the depth shown is from the sensor to the seabed
•
Below surface: the depth shown is from the water surface to the seabed
•
Below keel: the depth shown is from the bottom of the ship’s keel to the
seabed.
Depth units control the units that the depths are shown in; selections are:
•
m:
meters
•
ft:
feet
•
Fm:
fathoms
Sensor pos(ition) control allows the position of the sensor to be shown. Selections
are:
•
Fore ship:
the sensor is at the front of the ship
•
Aft ship:
the sensor is at the back of the ship
Digit controls the size of the text that shows the depths; selections are:
•
small: depth is shown in a small font
•
large: depth is shown in a large font
Changing depth scale
Touch and drag the echogram area to change the scale of depth that is shown in the
display. Drag downwards – to reduce the range. Drag upwards – to increase the range.
Alternatively – touch the Range button and enter the digital value from the screen
keyboard.
Changing picture advance speed
The right-to-left scroll speed can be changed by either of the following:
•
Touch the scroll speed indicator to open an adjustment slider
•
Touch and drag over the time scale area in the top of the echogram area
Setting the draft offset
The button with a picture of a ship adjusts the vessel draft offset.
Touch this button, and on-screen keyboard appears. Enter the
desired value and press Enter button.
Summary of Contents for EMES60
Page 8: ...7 2 3 System Structure ...