All information and data contained in this document are the exclusive property of SKIPLY SAS and may neither be used nor disclosed
without its prior written consent.
~ 9 ~
8. Insert or replace batteries
NOTE: Use only limited power 3.6 V Primary lithium-thionyl chloride (Li-SOCl2) batteries. We
recommend using batteries SAFT LS14500 or EEMB ER14505.
NOTE: Batteries replacement must be done in a dry indoor environment.
NOTE: Loading the batteries with their polarities inverted is forbidden and might cause fire and
injury, or damage to the surrounding areas.
NOTE: The user must replace all batteries at the same time and replace only with new batteries of
the recommended type. There is a risk of explosion if battery is replaced by an incorrect or non-
recommended type.
1.
Before opening the battery compartment lid, if moisture or water drops are present, dry Smilio S
housing with clean soft towel.
2.
Open the battery compartment lid using the 6 Philips screws and the appropriate screwdriver.
3.
In case of battery replacement, remove batteries. [1]
4.
Respect polarity. [1]
5.
Insert five AA limited power 3.6 V Primary lithium-thionyl chloride (Li-SOCl2) batteries. [2]
6.
Check that the gasket, which prevents water and dust from entering, is at the right place and
untwisted.
7.
Close the battery compartment lid using the 6 Philips screws and the appropriate screwdriver. [3]
NOTE: Do not dispose of used batteries in unauthorized places (you should respect the
environment by taking the batteries to a suitable collection site). Batteries should not be disposed of in
household waste but should be recycled instead.
NOTE: Do not dispose of batteries in a fire.
1
2
3
