All information and data contained in this document are the exclusive property of SKIPLY SAS and may neither be used nor disclosed
without its prior written consent.
~ 8 ~
7.
LoRa™ or SIGFOX® configuration
To configure the network (LoRa™ or SIGFOX®), please use the jumper on the motherboard behind
the battery compartment lid.
Figure 1
NOTE: Before remove or place the jumper, remove all batteries to turn off the device. NOT
HOT SWAPPING.
•
For LoRa™ use and configuration, remove the jumper.
•
For SIGFOX® use and configuration, place the jumper on its pin headers.
