All information and data contained in this document are the exclusive property of SKIPLY SAS and may neither be used nor disclosed
without its prior written consent.
~ 17 ~
rnm
Selection of Running Mode
•
1 = a single push permitted among the five
buttons during “tpb” delay. During “tpb”, a single
push permitted on the same button.
•
2 = a single push permitted on each button
during “tpb”. During “tpb”, a single push
permitted on the same button.
•
3 = During “tpb”, a single push permitted on
button 1 and a single push permitted among
button 2,3,4,5. During “tpb”, a single push
permitted on the same button.
•
4 = During “tpb”, a single push permitted on
button 1 or button 2 during “tpb” and a single
push among button 3,4,5. During “tpb”, a single
push permitted on the same button.
•
6 = RNM 2 with acknowledgement. For details
please refer to paragraph 16.
•
7 = RNM 9 CODE with acknowledgment. For
details please refer to paragraph 16.
•
8 = “Pulse” mode. For details please refer to
paragraph 16.
•
9 = “CODE” mode. For details please refer to
paragraph 16.
NA
1
9
Lwf
0xYZ
If Y greater than 0, then confirmed payload with a
maximum of Y emissions.
If Z greater than 0, then non-confirmed payload with
Z emissions.
If Y and Z equal to 0, then non-confirmed payload with
option to modify the number emissions with MAC
commands issues from the gateway or access point.
NA
0x00
0xFF
a
duty-cyle (0: disabled, 1: enabled)
NA
0
1
b
LoRaWAN backoff (0: disabled, 1: enabled)
NA
0
1
c
LoRaWAN piggyback (0: disabled, 1: enabled)
NA
0
1
d
LoRaWAN force DR0 at join procedure (0: disabled,
1: enabled)
NA
0
1
e
LoRaWAN ADR bit (0: disabled, 1: enabled)
NA
0
1
