PRODUCT INFORMATION MANUAL
SECTION: 9G-B DUETTE
®
VERTIGLIDE
™
SIDE STACK DESIGN
POWERVIEW
®
MOTORISATION
ISSUE DATE: NOVEMBER 2017
ORIGINATOR: SKILTEC
REPLACES ISSUE DATE:
APPROVED BY: D.ALTIPARMAKOVA
PAGE 7
■
Drill the screw holes using a 3mm drill bit.
CAUTION:
Use drywall anchors when mounting into drywall. Use the drill bit size
recommended by the manufacturer.
■
Attach the installation or extension brackets using the screws provided.
IMPORTANT:
The front edges of the brackets must be level and aligned to each other.
■
If using extension brackets, attach an installation bracket to
the underside of each extension bracket using the provided
screws and speed nuts.
■
If using spacer blocks, first attach the installation bracket to the
13mm spacer block before stacking additional spacer blocks or
shims together.
➤
Insert the legs of the installation bracket into the tabs on the
spacer block.
➤
Then rotate the installation bracket back.
➤
Use a maximum of three spacer blocks (38mm) per installation bracket.
IMPORTANT:
For the 38mm pleat size, a minimum 6mm rear clearance is recommended.
Tab
Summary of Contents for DUETTE VERTIGLIDE SIDE STACK DESIGN POWERVIEW MOTORISATION 9G-B
Page 2: ......
