PRODUCT INFORMATION MANUAL
SECTION: 9G-B DUETTE
®
VERTIGLIDE
™
SIDE STACK DESIGN
POWERVIEW
®
MOTORISATION
ISSUE DATE: NOVEMBER 2017
ORIGINATOR: SKILTEC
REPLACES ISSUE DATE:
APPROVED BY: D.ALTIPARMAKOVA
PAGE 4
Thank you for purchasing Luxaflex
®
Duette
®
Vertiglide
™
honeycomb shades. With proper
installation, operation, and care, your new shades will provide years of beauty and performance.
To get started, unpack the shade and remove all foam/
packaging materials. Check that all parts shown on
the packing list are included with the order.
Please thoroughly review this instruction booklet before
beginning the installation.
IMPORTANT:
Cords are wrapped around a
cord organizer located approximately 152mm
from the top of the moving rail. Please do not
unwrap the cords until instructed to do so.
Tools and Fasteners Needed
■
Flat blade and magnetic-tipped Phillips screwdrivers
■
Level (laser level is recommended)
■
Measuring tape and pencil
■
Power drill, 3mm
drill bit, and 6mm hex driver
■
Scissors
In addition, you will need fasteners designed to work with your specific mounting surface(s).
■
#6 Hex Head Screws (Provided).
Two 38mm screws are provided per installation bracket.
■
Longer #6 Hex Head Screws (Not Provided).
If using spacer blocks, use #6 screws long
enough for a secure attachment.
■
Speed Nuts and Screws (Provided).
Extension brackets come with speed nuts and screws.
■
Drywall Anchors (Not Provided).
Use drywall anchors when mounting into drywall.
Installation Brackets Required
■
The number of installation brackets required varies with headrail width, as
shown in the table.
Speed Nut
and Screw
(Two Provided with
Each Extension Bracket)
#6 x 38mm
Hex Head Screw
(Provided)
Longer #6 Hex Head Screw
for Use with Spacer Blocks
(Not Provided)
Do Not
Unwrap
Cords
NOTE:
Two installers are recommended for shades
over 2130mm wide.
Shade
Width
Brackets
Required
310mm – 788mm
2
789mm – 1675mm
3
1676mm – 2440mm
4
2441mm – 3531mm
5
3532mm – 4270mm
6
Summary of Contents for DUETTE VERTIGLIDE SIDE STACK DESIGN POWERVIEW MOTORISATION 9G-B
Page 2: ......
