Ski-Doo Skandic SWT 2013, Operator'S Manual

Page: 37 / 135

CONTROLS, INSTRUMENTS AND EQUIPMENT
mmo2011-004-100_a
TETHER CORD CAP
1. Free of dirt or snow
D.E.S.S. Flexibility
The D.E.S.S. of your snowmobile can
be programmed by your authorized
Ski-Doo dealer to accept up to 8 differ-
ent keys.
We recommend the purchase of ad-
ditional tether cords from your au-
thorized Ski-Doo dealer. If you have
more than one D.E.S.S. equipped
Ski-Doo snowmobile, each can be pro-
grammed by your authorized Ski-Doo
dealer to accept the other vehicles
D.E.S.S. keys.
6) Emergency Engine
Stop Switch
The emergency engine stop switch is
located on the RH side of handlebar.
Use the emergency stop switch to
stop engine in a emergency situation.
To stop the engine, push switch down
(OFF position).
mmo2007-009-038_a
OFF POSITION
To allow engine starting, the switch
must be in the ON position (UP).
mmo2007-009-038_b
ON POSITION
All operators of the snowmobile
should familiarize themselves with the
function of the emergency engine stop
switch by using it several times on first
outing and whenever stopping the en-
gine thereafter. This engine stopping
procedure will become a reflex and will
prepare operators for emergency situ-
ations requiring its use.
WARNING
If the switch has been used in an
emergency caused by a suspected
malfunction, the source of the mal-
function should be determined
and corrected before restarting
engine. See an authorized Ski-Doo
dealer for servicing.
7) Multifunction Switch
Multifunction switch is located on the
LH side of handlebar.
mmo2007-003-003_a
1. Headlights dimmer switch
2. Heated grips switch
3. Heated throttle lever switch
4. Start button
_______________
35