Ski-Doo EXPEDITION TUV, Operator'S Manual

Page: 47 / 135

mmo2008-001-019_e
TYPICAL
1. Lift seat latch
26) Rear Rack

WARNING
All objects in rear rack must be
properly latched.
Do not carry
any breakable objects. Excessive
weight in rack may reduce steer-
ing ability.
CAUTION: Always readjust suspen-
sion according to the load. The ca-
pacity of this rack is limited. Ride
at very low speed when loaded.
Avoid speed over bumps.
27) Tool Kit
A tool kit containing tools for basic
maintenance is supplied with the ve-
hicle under seat.
28) Hitch
The hitch can be used to pull most
equipment. Use a rigid tow bar.
29) Shields and Guards

WARNING
Never operate engine without belt
guard securely installed or, with
hood or access/side panels opened
or removed.
Your snowmobile is provided with a
number of shields and guards. Leave
these in place on your vehicle as they
are designed to keep clothing and
hands out of moving parts and away
from hot components. Never attempt
to make adjustments to any moving
part while the engine is running.
30) Windshield
Windshield provides operator com-
fort, as well as protection by deflect-
ing wind and snow away from the
operator.
31) Modular Seat
This snowmobile can be converted in-
to a snowmobile with one (1) seat only
instead of two (2). This could be use-
ful if you want to increase the cargo
area.
If necessary, backrest can also be re-
moved to increase the cargo area. Re-
fer to
BACKREST .

WARNING
Never ride with a passenger with-
out the backrest properly installed.
mmo2008-001-019_a
TYPICAL
1. Passenger seat (removable)
2. Driver seat
To remove the passenger seat, lift seat
latch, then tip driver seat over.
_____________________
45