manualshive.com logo in svg

Ski-Doo 2008 Rev series, Operator'S Manual

The Ski-Doo 2008 Rev series Operator's Manual is a comprehensive guide for users of these high-performance snowmobiles. Available for free download on manualshive.com, this manual offers expert instructions, troubleshooting tips, and maintenance guidelines, ensuring a seamless and enjoyable riding experience for all snowmobile enthusiasts.

Share
Download
background image

•

Incidental or consequential damages, or damages of any kind in-
cluding without limitation towing, storage, telephone, rental, taxi,
inconvenience, insurance coverage, loan payments, loss of time,
loss of income; and

•

Damage resulting from studs installed on tracks if the installation
does not conform to BRP’s instructions.

3)

LIMITATIONS OF LIABILITY

THIS WARRANTY IS EXPRESSLY GIVEN AND ACCEPTED IN
LIEU OF ANY AND ALL OTHER WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PUR-
POSE. TO THE EXTENT THAT THEY CANNOT BE DISCLAIMED,
THE IMPLIED WARRANTIES ARE LIMITED IN DURATION TO
THE LIFE OF THE EXPRESS WARRANTY. INCIDENTAL AND
CONSEQUENTIAL DAMAGES ARE EXCLUDED FROM COVER-
AGE UNDER THIS WARRANTY. SOME STATES/PROVINCES
DO NOT ALLOW FOR THE DISCLAIMERS, LIMITATIONS AND
EXCLUSIONS IDENTIFIED ABOVE, AS A RESULT, THEY MAY
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC
RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS
WHICH MAY VARY FROM STATE TO STATE, OR PROVINCE TO
PROVINCE.

Neither the distributor, any BRP distributor/dealer nor any other per-
son has been authorized to make any affirmation, representation or
warranty regarding the product, other than those contained in this
limited warranty, and if made, shall not be enforceable against BRP.

BRP reserves the right to modify this warranty at any time, being un-
derstood that such modification will not alter the warranty conditions
applicable to the products sold while this warranty is in effect.

4)

WARRANTY COVERAGE PERIOD

This warranty will be in effect from the date of delivery to the first re-
tail consumer or the date the product is first put into use, whichever
occurs first and for a period of:

TWELVE (12) CONSECUTIVE MONTHS, for private or commercial
use owners. However, the warranty coverage period on a snowmo-
bile delivered between June 1

st

and December 1

st

of a given year

will expire December 1

st

of the following year.

The repair or replacement of parts or the performance of service un-
der this warranty does not extend the life of this warranty beyond its
original expiration date.

_________________________

225

Summary of Contents for 2008 Rev series




















































































































































































































































Reviews:

No comments

Related manuals for 2008 Rev series

Team Durango DEX8T User Manual preview
DEX8T
Brand: Team Durango Pages: 32
Honda TRX680FA2011 Owner'S Manual preview
TRX680FA2011
Brand: Honda Pages: 250
Arctic Cat M6000 Operator'S Manual preview
M6000
Brand: Arctic Cat Pages: 64
Flagro FVO-1100TR Operating Instructions Manual preview
FVO-1100TR
Brand: Flagro Pages: 29
Suzuki LT-A450X 2007 Owner'S Manual preview
LT-A450X 2007
Brand: Suzuki Pages: 139
lehman Trikes Monarch II Honda GL1800 Installation Instructions Manual preview
Monarch II Honda GL1800
Brand: lehman Trikes Pages: 50
Blata MIDIQuadard Nstruction Manual preview
MIDIQuadard
Brand: Blata Pages: 24
KTM 2008 450 XC ATV Repair Manual preview
2008 450 XC ATV
Brand: KTM Pages: 223
Panasonic HYBRID IP-PBX KX-TDA100 Getting Started preview
HYBRID IP-PBX KX-TDA100
Brand: Panasonic Pages: 30
Knapen Trailers Exside User Manual preview
Exside
Brand: Knapen Trailers Pages: 20
Ace Sports Maxxam 150 2R Owner'S Manual preview
Maxxam 150 2R
Brand: Ace Sports Pages: 78
Yamaha YXZ 1000R SS 2022 Owner'S Manual preview
YXZ 1000R SS 2022
Brand: Yamaha Pages: 216
Yamaha BRAVO VK540III Owner'S Manual preview
BRAVO VK540III
Brand: Yamaha Pages: 354
DFK INTIMIDATOR XD 4 Installation Instructions Manual preview
INTIMIDATOR XD 4
Brand: DFK Pages: 84
TransTank TrailPro Deluxe Operator'S Handbook Manual preview
TrailPro Deluxe
Brand: TransTank Pages: 20
Crossfire Tonka 125 User Manual preview
Tonka 125
Brand: Crossfire Pages: 56
Crossfire ATV 110 User Manual preview
ATV 110
Brand: Crossfire Pages: 56
PLAYKIN QUAD RACER Instruction Manual preview
QUAD RACER
Brand: PLAYKIN Pages: 70

Brands by name

Popular brands

Load more brands