Ski-Doo 2008 Rev series, Operator'S Manual

Page: 137 / 243

Carburetor Engine Starting Procedure
Procedure
– Recheck throttle control lever operation.
– Ensure that the tether cord cap is in position and that the cord is
attached to your clothing eyelet.
– Ensure that the engine cutout switch is in the ON position.
– On fan-cooled models , turn ignition key to ON position.
– Activate the choke according to the temperature as explained be-
low.
Choke Application
Initial Cold Starting When Temperature is Below - 10°C (+ 15°F)
NOTE:
Do not operate the throttle lever with the choke lever on.
Set the choke lever to position 3.
NOTE: After the engine is started, let engine warm up at fast idle
until engine speed drops. Then, close off choke to ensure proper
air-fuel mixture.
1
2
3
A06H1KA
1. OFF
2. Position 2
3. Position 3
Initial Cold Starting When Temperature is Above
- 10°C (above + 15°F)
Set the choke lever to position 2.
NOTE: After the engine is started, close off choke to ensure proper
air-fuel mixture.
_________________________
135