Ski-Doo 2008 Rev series Operator'S Manual Download Page 2

Page: 2 / 243

SAFETY WARNING

Disregarding any of the safety precautions and instructions
contained in this Operator’s Guide,

SAFETY VIDEO

or on-product

warnings may result in injury, including the possibility of death.
This Operator’s Guide and

SAFETY VIDEO

should remain with

the snowmobile at time of resale.

In USA, products are distributed by BRP US Inc.
In Canada, products are distributed by Bombardier Recreational
Products Inc.

Bombardier* Lite

* Trademark of Bombardier Inc. used under license.

The following are trademarks of Bombardier Recreational Products
Inc. or its subsidiaries.

SKI-DOO

R.A.S.

XP-S™

RAVE™

SC-4™

REV

ROTAX

Pilot™

SC-136™

GSX

RER

DESS

TRA™

RT™

GTX

†

MX Z

SUMMIT

HPG™

†

GTX is a trademark of Castrol Ltd. Used under license.

mmo2008-004 DR
®™ and the BRP logo are trademarks of Bombardier Recreational Products Inc. or its affiliates.
©2007 Bombardier Recreational Products Inc. and BRP US Inc. All rights reserved.

Summary of Contents for 2008 Rev series




















































































































































































































































Search results

Summary of Contents for 2008 Rev series

Reviews:

Related manuals for 2008 Rev series

Brands by name

Popular brands

Ski-Doo 2008 Rev series, Operator'S Manual

Search results

Summary of Contents for 2008 Rev series

Reviews:

Related manuals for 2008 Rev series

Brands by name

Popular brands