Ski-Doo 2006 RT series Page 93 Operator'S Manual Download

Page: 93 / 187

22) Rear Rack



WARNING

All objects in rear rack must be properly latched. Do not carry
any breakable objects. Excessive weight in rack may reduce
steering ability.

CAUTION: Always readjust suspension according to the load.
The capacity of this rack is limited. Ride at very low speed when
loaded. Avoid speed over bumps.

23) Tool Kit

A tool kit containing tools for basic maintenance is supplied with the
vehicle.

Tool bag is located in engine compartment in front of left hand side
toehold.

A35B01A

LH SIDE OF VEHICLE

Tool kit

24) Spark Plug Holder

To keep spare spark plugs dry and prevent shocks that might affect
the gap adjustment or break them, a holder is provided in engine
compartment.

__________________________

Summary of Contents for 2006 RT series




























































































































































































Search results

Summary of Contents for 2006 RT series

Reviews:

Related manuals for 2006 RT series

Brands by name

Popular brands

Ski-Doo 2006 RT series, Operator'S Manual

Search results

Summary of Contents for 2006 RT series

Reviews:

Related manuals for 2006 RT series

Brands by name

Popular brands