SKF TMSU 1, Instructions For Use Manual

Page: 9 / 64

7 SKF TMSU 1
5. Remarks
• A short acoustic beep is audible in the headphone when changing the ampliication.
• The TMSU 1 can be used in combination with either alkaline (non-rechargeable) or
rechargeable AA batteries. Use only two of the same battery types at the same time.
• When battery charge is too low, the red operation LED will not light up. When the
remaining battery charge goes below acceptable operation levels during operation,
the user will be notiied with an acoustical signal (5 consecutive low frequency beeps).
• Rechargeable batteries cannot be charged while inside the TMSU 1.
6. Spare parts
Designation Description
TMSU 1-1 handset
TMSU 1-2 headset
TMSU 1-CC Toolcase with inlay for TMSU 1
Engl
ish