Installation
instructions for table
or bench mount
1
Choose a dry location within 2 feet
(609,8 mm)
of a 120 V AC electrical
outlet.
2
Mount bracket directly into table or Bench
(
† fig. 1
).
3
Insert reel into bracket, use care to line up
the mounting holes (
† fig. 2
).
4
Secure reel to bracket using the 8 in.
(203 mm)
pin (
† fig. 2
).
5
Once pin is fully inserted, secure 8 in.
(203 mm)
pin with cotter pin (
† fig. 2
).
6
Adjust ball stop so T-Tap or light head
hangs at your desired length.
7
Plug power cord into your 120 V AC elec-
trical outlet.
Installation
nstructions for wall
mount
1
Choose a dry location within 2 feet
(609,8 mm)
of a 120 V AC electrical
outlet.
2
Mount bracket directly into wall stud
(
† fig. 1
) leaving a minimum of 24 in.
(609,8 mm)
between the reel and the
outside edge of the wall or door frame.
Do not mount reel to drywall or any un-
supported wall material directly.
3
Insert reel into bracket, use care to line up
the mounting holes (
† fig. 2
).
4
Secure reel to bracket using the 8 in.
(203 mm)
pin (
† fig. 2
).
5
Once pin is fully inserted, secure 8 in.
(203 mm)
pin with cotter pin (
† fig. 2
).
6
Adjust ball stop so T-Tap or light head
hangs at your desired length.
7
Plug power cord into your 120 V AC elec-
trical outlet.
Installation
instructions for ceiling
mount
1
Choose a dry location within 2 feet
(609,8 mm)
of a 120 V AC electrical
outlet.
2
Mount bracket directly into ceiling joist,
beam of a reinforced ceiling (
† fig. 1
).
Do not mount reel to drywall or any un-
supported ceiling material directly.
3
Insert reel into bracket, use care to line up
the mounting holes (
† fig. 2
).
4
Secure reel to bracket using the 8 in.
(203 mm)
pin (figure B).
5
Once pin is fully inserted, secure 8 in.
(203 mm)
pin with cotter pin (
† fig. 2
).
6
Adjust ball stop so T-Tap or light head
hangs at your desired length
7
Plug power cord into your 120 V AC elec-
trical outlet.
Fig. 1
Fig. 2
Fig. 3
2
