- 8 -
951-171-236
Version 01
EN
1. Safety instructions
1.3 Intended use
Supply of lubricating oil within the speci-
fications, technical data and limits for the
provision of lubrication points and oiling of
surfaces in the metal-cutting production as
well as the forming and joining technology.
Usage is allowed exclusively for professional
users in the frame of commercial and eco-
nomic activities.
1.4 Foreseeable misuse
Any usage differing from the one stated in
these Instructions is strictly prohibited, par-
ticularly a usage:
○
outside the indicated ambient tempera-
ture range
○
outside the stated compressed air quality,
the stated pressure range and the volume
flow
○
with non-specified means of operation
○
without adequate pressure control valve
○
in areas with aggressive or corrosive ma-
terials (e.g. high salt concentration)
○
of plastic parts in areas with high ozone
levels or in areas with harmful radiation
(e.g. ionising radiation)
○
to supply, transport, or store hazardous
substances and mixtures in accordance
with annex I part 2-5 of the CLP regula-
tion (EG 1272/2008) or HCS 29 CFR
1910.1200 marked with GHS01-GHS06
and GHS08 hazard pictograms
○
to feed, forward, or store gases, liquefied
gases, dissolved gases, vapours, or fluids
whose vapour pressure exceeds the nor-
mal atmospheric pressure of 1013 mbar
by more than 0.5 bar at the maximum
permissible operating temperature.
○
in an explosion protection zone
1.5
Modiications of the product
Unauthorized conversions or modifica-
tions may result in unforeseeable impacts
on safety. Therefore, any unauthorized
conversions or modifications are expressly
prohibited.
